ESP8266 WiFi RFID NFC RC522 PHP, HTML MySQL AJAX Bootstrap Arduino Ethernet ESP32 SigFox LoRa IoT Eagle

---

RFID-System mit Online-Verwaltung - Versuchen Sie es HIER online!!!

---

Öffnungsprinzip:

Projekttechnologie:

PHP - Systemfunktionalität - Überprüfung der Chips

HTML - grafische und funktionale Systemelemente - Schaltflächen, Klicks

AJAX - dynamisches Aufrufen von PHP-Skripts - Echtzeitdaten zum Anbringen von Chips an einen RFID-Leser

C - Wiring - Programmiersprache für das NodeMCU - Entwicklungsboard mit ESP8266 - Chip.

Kostenlose Version (Kartenüberprüfung, keine zusätzlichen Sicherheitsfunktionen, kein Support und keine Garantie für die ordnungsgemäße Funktionalität):

Hardware für das Projekt:

;

NodeMCU v2/v3 Lolin

RFID Leser RC522 (13.56MHz)

Elektromagnetisches Relais - 5V

Sperrmagnet - 12 V / 24 V - Relaisgesteuert

Quellcode für NodeMCU 1.0 (v2 / v3) mit HTTPS-Konnektivität - Core 2.3.0 kompatibel:

---

ESP8266 (NodeMCU) - HTTP

---

/*|-------------------------------------------------------------|*/
/*|SKETCH PRE RFID SYSTEM S WEB ADMINISTRACIOU                  |*/
/*|VYHOTOVIL: MARTIN CHLEBOVEC                                  |*/
/*|FB: https://www.facebook.com/martin.s.chlebovec              |*/
/*|EMAIL: martinius96@gmail.com                                 |*/
/*|Doska: ESP8266 Generic / NodeMCU / WEmos D1 Mini + NXP RC522 |*/
/*|CORE: 2.7.4 compatible                                       |*/
/*|Testovacie web rozhranie: http://arduino.clanweb.eu/rfid/    |*/
/*|-------------------------------------------------------------|*/

//#define OTA //odkomentuj pre OTA UPDATE CEZ LAN cez espota.py
#include <ESP8266WiFi.h>
#include <SPI.h>
#include <RFID.h>

#ifdef OTA
#include <ESP8266mDNS.h>
#include <WiFiUdp.h>
#include <ArduinoOTA.h>
#endif

const char * ssid = "WIFI_NAME";
const char * password = "WIFI_PASSWORD";

const char * host = "arduino.clanweb.eu";
const int httpPort = 80; //http port
const int rele = 16; //GPIO16 == D0
#define SS_PIN 4
#define RST_PIN 5
RFID rfid(SS_PIN, RST_PIN);
unsigned long kod;
WiFiClient client;
void setup() {
  Serial.begin(9600);
  SPI.begin();
  rfid.init();
  pinMode(rele, OUTPUT);
  digitalWrite(rele, HIGH); //hotfix
  WiFi.begin(ssid, password);
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
#ifdef OTA 
  // Port defaults to 8266
  // ArduinoOTA.setPort(8266);

  // Hostname defaults to esp8266-[ChipID]
  // ArduinoOTA.setHostname("myesp8266");

  // No authentication by default
  // ArduinoOTA.setPassword((const char *)"123");

  ArduinoOTA.onStart([]() {
    Serial.println("Start");
  });
  ArduinoOTA.onEnd([]() {
    Serial.println("\nEnd");
  });
  ArduinoOTA.onProgress([](unsigned int progress, unsigned int total) {
    Serial.printf("Progress: %u%%\r", (progress / (total / 100)));
  });
  ArduinoOTA.onError([](ota_error_t error) {
    Serial.printf("Error[%u]: ", error);
    if (error == OTA_AUTH_ERROR) Serial.println("Auth Failed");
    else if (error == OTA_BEGIN_ERROR) Serial.println("Begin Failed");
    else if (error == OTA_CONNECT_ERROR) Serial.println("Connect Failed");
    else if (error == OTA_RECEIVE_ERROR) Serial.println("Receive Failed");
    else if (error == OTA_END_ERROR) Serial.println("End Failed");
  });
  ArduinoOTA.begin();
#endif  
  Serial.println("");
  Serial.println("WiFi uspesne pripojene");
  Serial.println("IP adresa: ");
  Serial.println(WiFi.localIP());
  Serial.println("Ready");
}

void loop() {
  if (WiFi.status() != WL_CONNECTED) {
    WiFi.begin(ssid, password);
  }
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
#ifdef OTA 
  ArduinoOTA.handle();
#endif 
  if (rfid.isCard()) {
    if (rfid.readCardSerial()) {
      Serial.println(" ");
      Serial.println("Card found");
      kod = 10000 * rfid.serNum[4] + 1000 * rfid.serNum[3] + 100 * rfid.serNum[2] + 10 * rfid.serNum[1] + rfid.serNum[0];
      client.stop();
      String kodik = String(kod);
      String data = "kod=" + kodik;
      String url = "/rfid/karta.php";
      if (client.connect(host, httpPort)) {
        client.println("POST " + url + " HTTP/1.0");
        client.println("Host: " + (String)host);
        client.println("User-Agent: ESP8266");
        client.println("Connection: close");
        client.println("Content-Type: application/x-www-form-urlencoded;");
        client.print("Content-Length: ");
        client.println(data.length());
        client.println();
        client.println(data);
        while (client.connected()) {
          String line = client.readStringUntil('\n');
          if (line == "\r") {
            break;
          }
        }
        String line = client.readStringUntil('\n');
        if (line.indexOf("OK") > 0) {
          Serial.println(F("VSTUP POVOLENY"));
          Serial.println(F("DVERE ODOMKNUTE"));
          digitalWrite(rele, LOW); //invertovane spinane rele active LOW
          delay(5500);              //cas otvorenia dveri
          digitalWrite(rele, HIGH); //zatvor zamok
          Serial.println(F("DVERE ZAMKNUTE"));
        } else if (line.indexOf("NO") > 0) {
          Serial.println(F("VSTUP ZAMIETNUTY"));
        } else {
          Serial.println(F("Prosim pockajte s dalsim overenim karty 5 sekund!"));
        }
      }
    }
  }

  rfid.halt();
}

---

ESP32 - HTTP

---

/*|--------------------------------------------------------|*/
/*|Project: RFID remote database access webapp             |*/
/*|ESP32 (DevKit, Generic), Arduino Core with FreeRTOS     |*/
/*|Autor: Martin Chlebovec (martinius96)                   |*/
/*|E-mail: martinius96@gmail.com                           |*/
/*|Test web interface: http://arduino.clanweb.eu/rfid/     |*/
/*|Usage license: MIT                                      |*/
/*|Revision: 31. March 2022                                |*/
/*|Tested stable ESP32 core: 2.0.2                         |*/
/*|657 kB flash usage, 37 kB RAM usage                     |*/
/*|--------------------------------------------------------|*/

#include <WiFi.h>
#include <SPI.h>
#include <MFRC522.h>

unsigned long code;
const int rele = 17; //RELAY PIN
#define SS_PIN 21 //CHIP SELECT PIN
#define RST_PIN 22 //RESET PIN

const char * ssid = "MY_WIFI"; //WiFi hotspot name
const char * password = "MY_WIFI_PASSWORD"; //WiFi hotspot password
const char* host = "arduino.clanweb.eu"; //domain - host
String url = "/rfid/karta.php"; //URL behind host domain --> target PHP file



TaskHandle_t Task1; //ULTRASONIC MEASUREMENT
TaskHandle_t Task2; //WIFI HTTP SOCKET
QueueHandle_t  q = NULL;

WiFiClient client; //socket client object
MFRC522 rfid(SS_PIN, RST_PIN);
static void Task1code( void * parameter);
static void Task2code( void * parameter);
void dump_byte_array(byte *buffer, byte bufferSize);

void setup() {
  Serial.begin(115200);
  SPI.begin();
  rfid.PCD_Init(); // Init MFRC522
  rfid.PCD_SetAntennaGain(112); // set antenna gain to max (00001110)
  rfid.PCD_DumpVersionToSerial(); //Write version of Firmware to UART
  pinMode(rele, OUTPUT);
  digitalWrite(rele, HIGH); //hotfix
  WiFi.begin(ssid, password); //pripoj sa na wifi siet s heslom
  while (WiFi.status() != WL_CONNECTED) {
    delay(1000);
    Serial.print(".");
  }
  Serial.println(F(""));
  Serial.println(F("Wifi connected with IP:"));
  Serial.println(WiFi.localIP());
  q = xQueueCreate(20, sizeof(unsigned long));
  if (q != NULL) {
    Serial.println(F("Queue FIFO buffer is created"));
    vTaskDelay(1000 / portTICK_PERIOD_MS); //wait for a second
    xTaskCreatePinnedToCore(
      Task1code,   /* Task function. */
      "Task1",     /* name of task. */
      10000,       /* Stack size of task */
      NULL,        /* parameter of the task */
      1,           /* priority of the task */
      &Task1,      /* Task handle to keep track of created task */
      1);          /* pin task to core 1 */
    Serial.println(F("RFID handler task started"));
    xTaskCreatePinnedToCore(
      Task2code,   /* Task function. */
      "Task2",     /* name of task. */
      10000,       /* Stack size of task */
      NULL,        /* parameter of the task */
      1,           /* priority of the task */
      &Task2,      /* Task handle to keep track of created task */
      0);          /* pin task to core 0 */
    Serial.println(F("HTTP Socket task started"));
  } else {
    Serial.println(F("Queue creation failed"));
  }
}

void loop() {
  if (WiFi.status() != WL_CONNECTED) {
    WiFi.begin(ssid, password); //pripoj sa na wifi siet s heslom
  }
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  yield();

}

static void Task1code( void * parameter) {
  unsigned long RFIDcode;
  if (q == NULL) {
    Serial.println(F("Queue in RFID handler task is not ready"));
    return;
  }
  while (1) {
    if (rfid.PICC_IsNewCardPresent() && rfid.PICC_ReadCardSerial()) {
      dump_byte_array(rfid.uid.uidByte, rfid.uid.size);
      rfid.PICC_HaltA();
      rfid.PCD_StopCrypto1();
      RFIDcode = code;
      xQueueSend(q, (void *)&RFIDcode, (TickType_t )0); //add RFID card UID to Queue
    }
  }
}
static void Task2code( void * parameter) {
  unsigned long RFIDcode;
  if (q == NULL) {
    Serial.println(F("Queue in HTTP socket task is not ready"));
    return;
  }
  while (1) {
    xQueueReceive(q, &RFIDcode, portMAX_DELAY); //read measurement value from Queue and run code below, if no value, WAIT until portMAX_DELAY
    String data = "kod=" + RFIDcode;
    client.stop();
    if (client.connect(host, 80)) {
      client.println("POST " + url + " HTTP/1.0");
      client.println("Host: " + (String)host);
      client.println("User-Agent: ESP32");
      client.println("Connection: close");
      client.println("Content-Type: application/x-www-form-urlencoded;");
      client.print("Content-Length: ");
      client.println(data.length());
      client.println();
      client.println(data);
      while (client.connected()) {
        String line = client.readStringUntil('\n');
        if (line == "\r") {
          break;
        }
      }
      String line = client.readStringUntil('\n');
      if (line.indexOf("OK") > 0) {
        Serial.println(F("ACCESS GAINED"));
        Serial.println(F("DOORS OPENED"));
        digitalWrite(rele, LOW); //inverted ACTIVE-LOW logic
        vTaskDelay(5500 / portTICK_PERIOD_MS); //duration of doors opened
        digitalWrite(rele, HIGH); //lock doors pack
        Serial.println(F("DOORS CLOSED"));
      } else if (line.indexOf("NO") > 0) {
        Serial.println(F("ACCESS REJECTED"));
      } else {
        Serial.println(F("WAIT 5 seconds before next attempt!"));
      }
    } else {
      Serial.println(F("Connection to webserver was not successful!"));
    }
    client.stop();
  }
}

void dump_byte_array(byte *buffer, byte bufferSize) {
  for (byte i = 0; i < bufferSize; i++) {
  }
  Serial.print(F("Detected UID (code) of RFID CARD: "));
  code = 10000 * buffer[4] + 1000 * buffer[3] + 100 * buffer[2] + 10 * buffer[1] + buffer[0]; //finalny kod karty
  //Serial.println(code);
}

Engagement:

---

RC522	NodeMCU
3.3V	3.3V
RST	D1 (GPIO5)
GND	GND
MISO	D6 (GPIO12)
MOSI	D7 (GPIO13)
SCK	D5 (GPIO14)
SDA	D2 (GPIO4)
IRQ	Es greift nicht ein

---

Relais	NodeMCU
5V	VIN / VUSB (Adapter / USB-Stromversorgung)
GND	GND
IN	D0 (GPIO16)

---

Relais	Magnetspule
NO	IN
COM	-
NC	12/24 DC/AC

RFID - schematics - ESP8266

RFID - schematics - ESP32